Color:	Black
Function:	Reinforcement
Classification:	Steel Plastic Glass Fiber Plastic Geogrid
Material:	Steel Plastic Glass Fiber Plastic Geogrid
Length:	100m
Width:	6m

Product name	One-way plastic geogrids/Unidirectional geogrids
Raw materials	Plastic
Length	100m
Width	6m
Product Introduction	One-way geogrid is formed by extruding high molecular polymer (PP or HDPE) into thin plate, punching regular mesh, and then stretching longitudinally.
Product Features	1. Provide stability of the foundation without the need for piles or other ground improvement measures 2. Allow safe access to site and the forming of a working platform 3. Avoid excavation and replacement of the soft soil 4. Prevent loss of drainage fill into the weak foundation 5. Provide even and controlled settlement 6. Allow faster consolidation
Product Application	1. Reinforcement and stabilization of riverside, embankment and side slope. 2. Roadbed reinforcement of road and railway, crack prevention, increase of roadbed strength. 3. Dyke reinforcement on soft ground for stress evenness, sedimentation adjustment, increase of stability and loading capacity of foundation. 4. Retaining wall.

Product name	Two-way geogrid/Bidirectional plastic geogrid
Raw materials	Plastic
Length	100m
Width	6m
Product Introduction	Bidirectional plastic geogrid is made of polymer through extrusion, plate forming and punching process and then longitudinal and transverse stretching.
Product Features	1. High tensile strength in both directions 2. Excellent tensile modulus 3. Higher load bearing capacity 4. Excellent soil stabilization 5. Good sub-base reinforcement 6. Heavy duty foundation support 7. Anti-corrosion, erosion control 8. high durability, long service life
Product Application	Bidirectional tensile plastic geogrid is suitable for reinforcement of embankment and subgrade, slope protection, cave wall, large airport, parking lot, wharf freight yard and other permanent bearing foundations.

Product name	Three-way geogrid
Raw materials	Plastic
Length	100m
Width	6m
Product Introduction	Three-way geogrids are made of polymer (polypropylene) through a process of extrusion, stretching, plate formation and punching, followed by longitudinal and transverse stretching, and Z-directional stretching.
Product Features	1. High tensile strength 2. Close contact with the roadbed 3. Increased friction 4. Prevent soil erosion 5. Anti-settling
Product Application	For roadbed and other construction projects

Product name	Steel-plastic geogrids
Raw materials	Plastic and Steel
Length	100m
Width	6m
Product Introduction	The steel plastic geogrid is made of high-strength steel wire through polyethylene or polypropylene for special treatment, and other additives are added to make it a composite high-strength tensile belt with rough relief on the surface.
Product Features	1.Reinforcement and Stabilisation of earth fencing walls, railways, highways and water conservation projects; 2.Reinforcement of road foundations; 3.Retaining walls; 4.Road slope repair and reinforcement; 5.Be used in noise barriers construction;
Product Application	Can be widely used in highway, railway, embankment and bridge abutment,, wharves, revetment, piers, airport, stadium, environmental protection construction, soft soil foundation reinforcement, retaining wall, slope protection and pavement crack and civil engineering.

Product name	Fiberglass Geogrid
Raw materials	glass fiber
Length	100m
Width	6m
Product Introduction	Fiberglass geogrid is a mesh structure material made of glass fiber as the main raw material by a certain weaving process.
Product Features	1. High tensile strength 2. Low elongation 3. Thermal stability 4. Physicochemical stability
Product Application	Various roadbeds of highways, railroads and airports

Tensile High-Strength Geogrids for Soil Reinforcement

Contact Supplier